Place of Origin:
Jinan, Shandong, China
Brand Name:
Wanuyou
Certification:
CE
Model Number:
ZSJ series
| 1, | Egg tray mould quantity | 1pcs | 2pcs | 3pcs | 4pcs |
| 2, | Raw material | Waste paper | Waste paper | Waste paper | Waste paper |
| 3, | Output for egg tray | 350pcs/hour | 700pcs/hour | 1000pcs/hour | 1300pcs/hour |
| 4, | Net weight per piece (gram) | 70g-75g | 70g-75g | 70g-75g | 70g-75g |
| 5, | The volume of waste paper consumed | 0.025ton / hour | 0.06ton / hour | 0.1ton / hour | 0.13ton / hour |
| 6, | The volume of water consumed | 0.05ton / hour | 0.15ton / hour | 0.2ton / hour | |
| 7, | Operators number | 2-3workers | 3-4workers | 4-6workers | 4-6workers |
| 8, | Area of workshop | More than 200M² | More than 240M² | More than 240M² | More than 240M² |
| 9, | Capacity of power | 25KW | 40KW | 50KW | 60KW |
Production Line Introduction
Pulping System
1. Put the raw material and water into the hydraulic pulper. you will get the paper pulp after mixed 10-20 minutes.
2. Pulp pump will transfer the finished paper pulp into the slurry pool.
3. The pulp pond beater will mix the pulp concentration.
4. The pulp pump will transfer the pulp into forming machine.
Molding System
1. The molding machine is to adsorb the pulp to the molding mold, adsorb the pulp to the molding mold through the suction of the vacuum system to absorb the excess water into the gas-water separation tank, and then pump the water to the tank for storage.
2. The molding mold adsorbs the pulp and then forms it. and then the transfer mold takes out the finished product and sends it to the they drying tray.
Drying System
1.Heat source: natural gas, diesel, liquefied petroleum gas and other combustion liquids and gases.The transmission mode adopts industrial transmission chain to drive the net plate transmission, which runs in the drying line.
Send your inquiry directly to us
